Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$4.99
Threaded bolt-on caliper style pads - 40mm pad length
$5.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
$9.49
Forged Alloy seat-clamp.
$9.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm
$15.99
- 25.4mm bar clamp - 620mm width with 10 backsweep
$29.99
Lightweight and durable die-cast alloy construction - 2-bolt clamp for maximum adjustability - 15mm offset - 400mm length
$31.99 - $39.99
Lightweight and strong forged alloy stem. - Adjustable between 0 and +60 - Removable face plate for easy installation. - 180mm quill length.
$29.99
- Durable CrMo construction with 4-pawl internal engagement system - Fits left-hand (LH) threaded hubs only (allows mounting drivetrain on left side of bike for grinding on the right side) - Maintain with petroleum based lubricant (no wax/Teflon)
$9.99
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$16.99
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$21.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$39.99
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$42.00 - $43.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$77.99
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$19.99
In the unlikely event that you might need to replace the guard from your Barrier sprocket here it is, built from super tough nylon, the replacement guard comes with 4 x bolts for securing it to your sprocket.
$35.99 - $77.99
- CNC machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting with 9sp and 10sp drivetrains - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics
$59.99
Our oval chainring features our highly sought-after tooth profile for the best 1x drivetrain performance. Combine this chainring with a modern-day clutch derailleur and never worry about dropping a chain again. - Oval shape allows for greater power, increased traction, and a smoother spin - Blackspire's oval shape has an ovality of 12-13% with a timing of 115 degrees after the top dead center - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems, 9-speed drivetrains require a 10-speed chain - 30 tooth features built-in tabs for a 49.5mm chain line and is threaded for ideal fitment - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$64.99
Our RaceFace Cinch Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11 and 12-speed systems. 9-speed drivetrains require a 10-speed chain - Direct mount for Race Face Cinch Boost cranks, 3mm offset for a perfect 52mm chainline - Direct mount for Race Face Cinch cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$64.99
- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum
$65.99
- Protect your expensive narrow wide chainring from impacts - Lightweight thermoplastic bonded to a lightweight alloy backplate - 32t model fits 26-32t round rings and 26-30t oval rings - 38t model fits 34-38t round rings and 32-36t oval rings - Compatible with 1X and 2X drivetrains - CNC'd in Canada from 6061 aluminum with laser-etched graphics
$74.99
Our Shimano M9100 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought after Bi Directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$4.99
- Saddle clamp for straight seatpost - Diameter: 22.2mm
$19.98
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
$25.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$29.99
Cold-forged for strength, bead-blasted for grip These bar ends feature a no-slip gripping surface and offer more comfortable hand position options. Bar ends offer increased comfort, greater variability in hand positioning, and improved leverage for climbing. Bontrager Forged Bar Ends are cold-forged for strength and durability and bead-blasted for better grip and control on the trail. Product details - Cold-forged, welded alloy construction - Bead blasted finish provides grip and adds strength - Offset tube design for more usable handlebar area
$29.99
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing
$29.99 - $39.99
Instantly add comfort to your existing saddle with a cushy Bontrager Gel Saddle Cover. Rubberized on the underside to help it stay firmly in place, Bontrager's Gel Saddle Cover installs in seconds, thanks to a drawstring and toggle closure retention system.
$34.99
Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better. - Ideal stretch for quick and easy installation - Features twice the amount of gel for maximum comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing - Double Gel Cork Tape has a thickness of 3.0mm
$45.99
Features a wide range of adjustment to dial in your fit. Ensure a proper fit for the best ride experience. Product details - High-quality alloy adjustable stem is quill-style, for use with threaded forks - Seamless integration with Bontrager's Elite Blendr mount kit, sold separately - Features 64 degrees of angular adjustment - 50mm stack height adjustment allows for a wide-range of fit options - Quill stem length is 180mm
$51.99
The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim
$54.99
A light and durable mountain bike handlebar with etched guides for easy set-up. A new set of bars Bontrager Comp 31.8 MTB handlebars are a light and durable mountain bike handlebar with etched guides for easy set-up that deliver the look and feel of a performance bar at a value price. Product details: - Single-butted, tapered-wall, 6061-T6 alloy construction - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control set-up - 40mm of cut marks on each side for easy width customization - Bar end compatible
$69.98
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
$69.99
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration. - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Includes one Blendr base to integrate Ion lights and Trip computers
$109.99 $134.99 19% Off
Our most versatile saddle gets a shorter profile for targeted comfort, perfect for riders of all genders and all disciplines. Short stature, consistent comfort The Verse Short Comp’s shorter profile elevates comfort across all riding positions with targeted support thanks to a versatile design that’s ideal for riders of any gender. A full central cutout eliminates pressure while Wing Flex allows the saddle’s edges to adapt to riders’ inner leg movement and pelvic rotation. Product details: - Short profile provides targeted support for any gender rider in a performance riding position - Wing Flex allows the shell's edges to adapt to rider's inner legs movement and pelvic rotation - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Lightweight shell balances weight, strength, and compliance - Comp-level trim optimizes foam padding for added lightweight comfort - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Blendr accessory mounts offer clean integrated mount for rear Flare light Features: For men, for women, for mountain, for road. Verse Short is designed to add comfort for all genders. It's your go-to performance posture saddle for both trail and road. Short profile The short profile provides targeted support and a performance riding position for all genders. Wing flex Wing flex allows the saddle shell's side edges to flex and adapt to a rider's inner leg movement and pelvic rotation. Full-length cutout A full saddle cutout minimizes soft tissue pressure for lasting comfort and performance.
$124.99
Enjoy comfortable performance on long rides with the Yatra Comp women’s saddle. The CRZ enhances soft tissue protection, and a wider nose maintains comfortable stability. - Performance Posture 3 for pelvic rotation with a balance of comfort and efficiency - Hollow Chromoly rails increase compliance for ultimate comfort - Wider cutout and shaped nose yield stable comfort in an aggressive position - Women Specific Design is engineered to yield better fit and comfort for women - Recessed saddle cavity provides contour relief zone and eases pressure on soft tissue - Size Specific Curvature ensures each saddle is designed specific to its width - Nylon composite shell
$134.99
Our most versatile performance saddle offers a full cutout for targeted support and soft tissue pressure relief for riders of all genders and all disciplines. For mountain, for road, for men, for women Our most versatile performance saddle puts you in a power posture for speed and control wherever you ride—and it’s available in an wide range of sizes to ensure you get the fit you need. A full cutout ensures long-haul comfort for all riders and all terrain. Plus, it has longer saddle rails to tailor your fit and an integrated Blendr mount for a Flare tail light. Product details - Saddle design supports riders of all genders in a performance riding position on road and mountain bikes - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Lightweight shell provides balance of weight, strength, and compliance - Comp-level trim optimizes foam padding for added lightweight comfort - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Available Blendr accessory mounts to cleanly integrate rear light
$154.99
Pro performance post A seatpost should do one thing well — hold your seat. Our new carbon fiber Pro seatpost does that and more with a reliable 2-bolt design that lets you swap saddles with ease. Great for road or mountain use and available in a slew of diameters, lengths and offsets, this post gives you the setup versatility you've always wanted. - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - OCLV carbon fiber shaft - Forged 6061-T6 alloy head with OCLV carbon fiber top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
$159.99
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
$37.50
Brooks Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability. Included are a pair of Brooks Rubber Bar End Plugs.
$165.00
The Cambium C15 All Weather saddle is made for years of hard riding, in a forward riding position, for more sporty cycling. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
$85.00
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
$14.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$15.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction
$26.99
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: IS52/40/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide • Material: N/A • Weight: 35.35g
$35.99
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 62.79g
$35.99
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 35.35g
$39.99
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$39.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$46.99
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$49.99 $74.99 33% Off
Replacement stainless steel cartridge bearings for Cane Creek 110 headsets - 38mm, 41mm, and 42mm are sold in pairs - 52mm sold individually
$49.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g
$54.99
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$55.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g
$89.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$99.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$79.99
Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.
$114.99
The Martinez stem is inspired by classic-looking top-load stems with key improvements in strength and geometry. A 48mm reach gives a responsive feel while the standard 22mm rise can be reduced to just 8mm by inverting the stem. Six oversized Allen key bolts provide plenty of strength and torque and give the stem a classic well-balanced look and feel. Beveled edges and the tapered body profile give the stem a classic yet unique look. Corey Martinez tested and approved. - Reach: 48mm - Rise: 22mm (8mm Inverted) - Stack Height: 30mm - Material: 6061-T6 Aluminum - Bolts: Solid Oversized w/6mm Allen Hex - Weight: 10.9 oz
$13.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
$35.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
$39.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
Page 1 of 8 Next page